PRODUCT DESCRIPTION:
Spectracide Terminate® Termite Detection & Killing Stakes₂ is two products in one – the pop-up indicators detect termite activity, and the stakes kill foraging termites. Install in minutes. This complete kit includes 15 stakes with easy-to-find locator shields, an instruction booklet and a digging tool. Place the stakes 2 to 3 feet away from your home and no more than 10 feet apart. Use stakes in termite-favorable areas, including under around decks or crawl spaces – place more stakes in moist areas. Made with Dow® Technology. Money-back guarantee (see product packaging for details). Read and follow all directions before using this product.Termites rarely come to the surfaces of what they're eating, so most of the time you will never know they have invaded your home until it is too late. Using Spectracide Terminate Termite Detection & Killing Stakes₂ is an important step toward reducing your risk of termite damage. It is very important that you monitor your stakes as directed and replace all stakes after 12 months of use.
Not recommended as sole protection against termites, and for active infestations, get a professional inspection.
Dow® is a registered trademark of The Dow Chemical Company.
Ingredients
Hexaflumuron:0.50%
Other Ingredients:99.50%
Total:100%
SAFETY DATA SHEETS & PRODUCT LABELS:
SDS
Directions For Use:
STOP! Read Entire Label Before Use.It is a violation of Federal law to use this product in a manner inconsistent with its labeling. For outdoor use around the home.
1. GATHER TOGETHER:
- • Spectracide Terminate® Termite Detection and Killing Stakes2 and locator shields
- • Tape measure
- • Enclosed graph paper
- • Enclosed auger
- • Power drill (optional)
2. DETERMINE THE NUMBER OF STAKES YOU NEED:
The number of stakes needed is determined by the distance around the outside of your house. To estimate, use the square footage of your home excluding your garage, attached decks, patios and porches. Home designs vary, but if you know the approximate square footage of your home, the chart will help you choose the number of stakes you need.
- • One-Story Home: Up to 1,200 sq ft = 10 Stakes
- • One-Story Home: Up to 1,200 to 2,500 sq ft = 10 Stakes
- • Two-Story Home: Up to 1,500 sq ft = 20 Stakes
- • Two-Story Home: Up to 1,500 to 3,000 sq ft = 20 Stakes
3. PREPARE DRAWING OF YOUR HOUSE:
Using the enclosed graph paper, make a drawing of the outside of your house. Note areas on the drawing such as doors, bushes, chimneys, etc., that will help you locate the stakes during the inspection process. Look for areas that are likely to support termite activity and note them on your drawing. These might include areas that retain moisture around downspouts, spigots, air conditioner lines and low areas with poor drainage.
4. INSTALL THE STAKES AROUND THE HOUSE:
Using the enclosed auger, dig holes 2 to 3 ft away from the foundation and no more than 10 ft apart (DETAIL A on Label). Insert the stakes with locator shield in the holes. Place stakes closer together in "termite critical" areas (DETAIL B on Label). Notice: Do not use auger for any purpose other than installation of the Spectracide Terminate® Termite Detection and Killing Stakes2.
5. INSPECT THE STAKES:
Check the stakes for termite activity when the pop-up indicator is seen by pulling the stakes from the ground. The locator shields will help make removal of the stakes easier. It is important to check the stakes every three months. If you live in an area suspected to contain Formosan subterranean termites, the frequency of stake inspection should be increased to once a month.
Look for signs that the bait has been eaten (DETAIL C on Label) or that termites are present inside the stake (DETAIL D on Label).
- 1. Replace the active stake with a new stake;
- 2. Install additional stakes (three or more) within one foot of the infested stake; and
- 3. Note the date, the location and the additional stakes on your drawing.
All stakes must be replaced or removed every 12 months. Be sure to wash your hands thoroughly after completing the inspection
Do not reuse the bait cartridges. Subterranean termites secrete colony-specific pheromones that become incorporated into the bait while feeding and foraging. The pheromones left in the bait by one colony will cause feeding deterrence or repellency to other colonies, causing it to be ineffective.
Storage & Disposal:
Storage & Disposal:
DO NOT contaminate water, food or feed by storage or disposal.
Pesticide Storage: Store in original container in a dry storage area.
Pesticide Disposal: Product not disposed of by use according to label directions should be wrapped in paper and placed in a trash can.
Precautionary Statement:
Precautionary Statements
Hazards to Humans and Domestic Animals
CAUTION. Harmful if absorbed through skin. Avoid contact with skin, eyes or clothing. Wash hands thoroughly with soap and water after handling and before eating, drinking, chewing gum, or using tobacco. Remove and wash contaminated clothing before reuse.
Environmental Hazards:
This product is toxic to fish and other aquatic organisms. To protect the environment, do not allow pesticide to enter or run off into storm drains, drainage ditches, gutters or surface waters. Applying this product in calm weather when rain is not predicted for the next 24 hours will help to ensure that wind or rain does not blow or wash pesticide off the treatment area.
First Aid:
If on Skin or Clothing:
Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a Poison Control Center or doctor for treatment advice. Have the product container with you when calling a Poison Control Center or doctor, or going for treatment.NOTICE:
To the extent consistent with applicable law, buyer assumes all responsibility for safety and use not in accordance with directions.
Questions & Comments? Call 1-800-917-5438 or visit our website at www.spectracide.com
